SUPPORT

V5.03.006

- V5.03.xxx is valid for update when DDP is at version v5.02.003 or later (both DEB10 or older)

- Fix for crash with two FV’s with same root inode

- Fix for crash when updating old software and desktops attempt reattach

- Fix for LSI card events now showing in GUI event notification

- Fix for gen-demokey for DEB10 install

V5.03.005

- version for both old Linux and Deb 10 else identical to V5.02.003-rc1.

- fix for delay in permission changes in client

V5.02.003

- Fix for files getting unlinked when a folder volume containing a folder with a not empty Trash

is deleted on another desktop. The unlinked files take up capacity. These files are now moved

to the .lost+found directory.

V5.02.001

- Fix for timeout issue on desktop control connection in V5.01.20

- Option in GUI user/groups/volumes to only show selected and incremental search filter.

V5.01.020

- Fix for rare timeout issue on DDP internal AVFS connection (SMB, Archiware)

V5.01.019-rc1

- Performance improvement by caching more file system data base content into memory

V5.01.018

- Fix for the rare occasion that the metadata server does not accept new AVFS connections anymore.

V5.01.017

- a separate Client web interface plus manual

- bug fix IO Monitor Data Location names

V5.01.016

- FV 'overlap' detection improved for automount to further prevent overlap of ddpvolume and folder volumes.

- Desktop user check is made case insensitive to make automount behaviour identical to ddp users. 

- Fix for crash when creating FV during volume checking shortly after DDP startup.

- ISCSI target version 4.2.09 with improved behaviour when RAID card fails or external JBOD is disconnected during operation.

- Error messages logged when fs database error is detected.

- Maximum file size protection changed from 1T to 16T.

V5.01.015

- Fix for bug that caused FV free space to decrease more as amount of data copied to it in certain cases (e.g. Explorer copy), need 'recalculate' to restore correct indication.

- Fix for LDAP user/group import failing when group length longer as 100 characters

- Fix for Samba client in DDP rounding timestamp in case timestamp sub second part not zero.

V5.01.014

- Fix for watchdog failing on failover DDP heads, make master reboot after 3000 seconds

- Allocation Group names only allow alphanumeric characters

V5.01.013

- Fix for rare client connection loss under heavy load with spindles

- Allocation Group can be added/modified from GUI

V5.01.012

- Fixed race condition causing possible iSCSI crash under heavy load, target version 4.2.07

V5.01.011

- iSCSI target version 4.2.06 with fix for missing thread wakeup resulting in a dead lock.

V5.01.010

- Obsolete V4 support removed

- Fix crash permission update inactive folder. Issue: FV existed in web interface layer but not in the file system database

- Fix bug demand/pin counter in bitmap regeneration (range_claim()), internal improvement

- Removed old client protocol connection support

- file atime lazy writeback, check on a time frequency during file streaming

- Fix for crash when a  FV was deleted while deleting files in  this FV

- New created FV capacity fixed

- Characters '.' and '-' allowed again in user names

- Check on use of FV name characters build in 

V5.01.009

- Target version 2.4.05:

- fix race condition causing crash in combination with caching

- rate limit error prints

- V4 to V5 conversion checks improved

- Access permission on files lagging after move across FV: fixed

- Access permission update nested FVs fixed

- Obsolete V4 volume support removed

V5.01.008

- Fix for 'cache clear' button for 'On Demand Cache' part

- New web interface icons

- Popup screen on the web browser when  connection to the DDP is lost

V5.01.007

- Fix in iSCSI target for page-unalligned writes resulted in a target crash. Target version 4.2.04 (Info page GUI)

V5.01.006

- Fix for client hang on delete folder with no permission

- 'make dir' function in Folder Volume page

-  Improvements on the web interface

- Permission change update improvements 

-SMB remains active when DDP restart 

-Delete the browser cache after updating

- If the symlink does not exist (update issue) a dummy value is returned

V5.01.005

- Gui improvements for large number groups/users

- Gui Improvements 'Edit Access' long file names

- Improvements in handling server connection interruption. Volume(s) will force unmount and remount on server connection restore.

- LDAP import group members format extended

- delete the browser cache after updating

Important changed from V4 to V5

When installing V5 on a V4 DDP the file system is converted to a DDP directory database so one can not go back to V4.

With V5 desktops drivers connected to a V5 DDP the volume or folder volume is created in the DDP and does not exists in the DDP anymore.

V5 installer is still on default regarding the unicode characters. When this needs to be changed the database needs to be deleted and newly generated; with the new setting. The database can be deleted via service connection or via commands.

(only needed for symlinks) Be aware that before installing V5 you need to install V4.01.019 first and mount ddpvolume or at least one folder volume and do recalculate and wait for the recalculate to be finished before unmounting and then installing V5