SUPPORT

In this topic are listed the fundamental rules that should be considered before integrating the DDP into any network. None of these rules should be negle...

Setting up your Brocade ICX-6450 switch with the proper settings is an important step as any network misconfiguration can lead to performance problems. T...

Here is the procedure to turn off flow control for one specific port on your brocade switch with CLI: Let’s consider we want to configure 1/2/1 port for exa...

In this tutorial, we are going to learn how to write/customise a traffic control script. Let’s take the following traffic control configuration as an exam...

By default the DDP first NIC is configured as the following: IP address: 172.16.5.4 Subnet mask: 255.255.0.0 Flow-control: On MTU: 1500 ...

The DDP doesn't require any VLAN to be setup in order to work properly. However if you need to configure VLANs in your network, you can do it at...

If some of your client machines are out of reach from the DDP network, you might want to use a gateway which will forward the packets to the right destinati...

This solution will describe how to configure VLANs on your Brocade switch. - Connect to the switch via the console port (or telnet/ssh when availabl...